The Cement Bond Log Tool is an advanced acoustic logging tool used to evaluate the bonding quality between casing and cement, as well as between cement and formation. By dividing the borehole environment into eight 45° sectors, it enables a "panoramic" image of cementing quality.
Core Goal
To evaluate the cement bond quality of the cement sheath in a cased hole, specifically including:
◆ First-interface bonding-Adhesion between the cement sheath and the outer surface of the casing.
◆ Second-interface bonding-Adhesion between the cement sheath and the formation (or the previous casing string).
Detection of the circumferential uniformity of the cement sheath-the central value provided by the "eight-sector" design.
How Does Cement Bond Log Tool Work?
The logging work step of Cement Bond Log Tool is as below following:
1. First install, in sequence, the lifting sub, the MCBL, centralizer 2, and the CANbus Terminator (normally the CANbus Terminator is pre-installed on the centralizer). Then lower the string to the wellhead, fix the tool at the wellhead through the wellhead spool , and finally remove the lifting connector.

2. Install the centralizer 1, lifting connector, then fix wellhead spool at the joint of the centralizer, and After it is fixed, remove the lifting connector.
3. Install a 13-core to single-core adapter connection cable and power it on (150V), (Or only install a battery sub for power supply).
4. After the power-on is completed, the tool can start logging. Once it reaches the bottom of the test section, the tool stays for 10 minutes and then log upward at a constant speed not exceeding 300 m/h.
Memory Type vs Conventional Wireline Type
◆ Memory Type Logging Tool
Data transfer-Data are first stored in downhole memory chips inside the tool and replayed to the surface after the run.
Deployment-The tool is conveyed on slickline, drill pipe, tubing, or run in‐hole with the casing / completion string.
Applicable scenarios
Horizontal / highly-deviated wells (wireline conveyance impractical)
Through-tubing logging (no need to pull the production string)
Cable-free environments (e.g., platform deck space restrictions)
Logging while drilling or synchronous logging at well completion
Advantages-Flexible deployment, independent of wireline, suited to complex well architectures.
Disadvantages-Data are not real-time; data loss is possible if the tool becomes stuck; an additional replay process is required.
◆ Conventional Wireline Logging Tool
Data transfer-Real-time data transmission to surface via logging cable.
Deployment-Lowered on a dedicated logging cable.
Applicable scenarios
Vertical or moderately deviated wells where a cable-conveyance path is available.
Advantages-Real-time data quality monitoring; logging parameters can be adjusted on the fly.
Disadvantages-Limited by cable length and strength; operations become difficult in horizontal or complex wellbores.
Our Cement Bond Log Tool
A cased-hole logging solutions provider




Data interpretation logic
By comparing data from the individual sectors, the logging engineer judges cement quality:
First Interface : Casing–Cement
Monitored signal-3-ft amplitude.
Anomaly-an abnormally high amplitude in any sector indicates poor cement fill (void) or a channel at that azimuth.
Second Interface: Cement–Formation
Monitored signal-5-ft receiver waveform.
Anomaly-absence or distortion of the formation arrival indicates fractures or channeling within the cement sheath.
Conclusion of A-One Oil Cement Bond Log Tool
The Cement Bond Log Tool is a high-technology system tailored to the cement-evaluation demands of modern complex wells, especially horizontals. The memory design eliminates the conveyance problems inherent in complex geometries, while the eight-sector measurement overcomes the long-standing limitation of conventional CBL/VDL logs in detecting circumferential bond variations. The tool delivers full 3-D spatial information on sheath bonding-both along the wellbore and around its circumference, furnishing critical data for assessing cement quality, ensuring zonal isolation, and preventing inter-zonal communication.
Welcome to contact us to learn more about our tools via e-mail info@a-oneoil.com







