info@a-oneoil.com    +86-029-38001009
Cont

Have any Questions?

+86-029-38001009

Jul 10, 2025

Cement Bond Log Tool Technology and Applications

What is Cement Bond Log Tool

 

The Cement Bond Log Tool technology is a new method for evaluating cementing quality. It uses multiple transmitter and receiver probes to measure the acoustic attenuation in different wellbore areas respectively, it can measure the cement cementing quality along the entire circumference of the casing in both longitudinal and transverse directions. The bonding condition of the casing and the cement ring is visually and vividly displayed in the form of grayscale images, providing a more accurate and detailed evaluation of the first interface. It realizes 360° imaging display of the first interface bonding, which can reflect phenomena such as grooves and holes. It can evaluate the cement bond condition of the second interface. This technology has a very good application prospect.

1x

 

Data Interpretation Method

 

The interpretation is based on the scale value of the CBL curve in the free casing as the base value of the free casing. The relative amplitude obtained by comparing the measured values of the CBL curve of other sections with it is used to determine the cement bonding situation at the first interface.

(1) When the relative amplitude is ≤20%, cemention is good;

(2) When the relative amplitude is between 20% and 30%, cemention is medium;

(3) When the relative amplitude is >30%, cemention is poor.

The interpretation of the Cement Bond Log Tool is divided into five levels of scales, based on the relative amplitude of the zonal acoustic amplitude, represented by the E value.

1x

(1) When the E value is between 0 - 20%, VDL grayscale color is black, indicating good cement bonding;

(2) When the E value is between 20% - 40%, VDL grayscale color is dark gray, indicating partial cement bonding;

(3) When the E value is between 40% - 60%, VDL grayscale color is medium gray, indicating partial cement bonding;

(4) When the E value is between 60% - 80%, VDL grayscale color is light gray, indicating partial cement bonding;

(5) When the E value is between 80% - 100%, VDL grayscale color is white, indicating either no cement bonding or free casing.

Logging Data Application and Analysis

 

The Cement Bond Log Tool was conducted in a certain well. As indicated in Figure, the CBL waveform amplitude suggests moderate bonding at the first interface. The VDL data reveals poor bonding at the second interface. Examining the sector profile (Waveform 1), darker colors denote better cement bonding, while lighter colors indicate progressively worse bonding, with white areas having virtually no cement. It is evident that there are cavities at depths of 3,523 m and 3,529 m.

By the logging results can be seen that conventional acoustic variable density (AVD) logging tools provide an omnidirectional assessment of the cement bond quality around the casing. These tools can only reflect the average bond quality of the cement sheath in the circumferential direction. For instance, when the 3-foot CBL indicates moderate cement bonding, it is not possible to differentiate between the following scenarios: voids and cement microchannels, voids and channeling, low bond strength, and high bond strength with voids. The eight-sector cement bond logging tool overcomes this deficiency. It resolves the ambiguity in the interpretation of conventional acoustic variable density logging and offers promising application prospects.

Conclusions and Suggestions

 

The Cement Bond Log Tool technology can fully replace the conventional acoustic variable density logging. It not only has all the parameters of conventional acoustic variable density logging but also adds the sector profile. This enables a rapid and intuitive reflection of the original conditions. The eight-sector cement bond logging technology is also being gradually promoted.

◆ Advantages of this Technology

1, It can visually and vividly evaluate the cement bonding condition within a 360° range of the first interface, and can directly determine the situation of holes, grooves, etc., providing an accurate basis for the next step of measures. It is more advanced than the conventional acoustic logging tool.

2, It is unaffected by heavy cement or casing thickness. It is an advanced cementing quality evaluation method with great application potential.

◆ Disadvantages of this technology.

The application effect of Cement Bond Logging in dual-casing not be good, as it is greatly affected by the multi-layer reflective surface of the double-layer pipe string.

Welcome to contact us to learn more about our tools via e-mail info@a-oneoil.com

Send Inquiry