Description
A-One Oil Multi-Finger Caliper (24 finger) MFC43C can provide accurate measurements of the inner diameter of the casing. High-quality measurement data can enable three-dimensional imaging of the casing inner diameter and can calculate statistical data for oil/casing corrosion, deformation, and bending.
Through the MFC43C interpretation software can display the actual condition of the measured casing inner wall in three dimensions, and at the same time, calculate the engineering data of the measured casing and perform statistical analysis.
Technical Parameters
|
General Specs |
|
|
Pressure Rating |
100Mpa |
|
Temperature Rating |
175℃ (350°F) |
|
Working Voltage |
18-24V |
|
Working Current |
100mA |
|
Length |
1848.5mm |
|
Connection Length |
1798.5mm |
|
Logging Speed |
10m/min |
|
Connector Type |
13-Core |
|
Logging Conditions |
|
|
Is it possible to have H2S here |
Measurable |
|
Tool Position |
Center of Casing |
|
Dimensional Parameters |
|
|
Can be with an Extended Arm |
Can |
|
Diameter |
43mm (24-Arm) |
|
73mm (40-Arm) |
|
|
100mm (60-Arm) |
|
|
Well Diameter Measurement Range |
50mm~170mm (24-Arm) |
|
80mm~245mm (40-Arm) |
|
|
110mm~270mm (60-Arm) |
|
|
Measurement Accuracy |
|
|
Accuracy |
±1mm |
|
Resolution Ratio |
0.1mm |
|
Relative Azimuthal Accuracy |
±3° |
|
Relative Azimuthal Range |
0～360° |
|
Well Deviation Accuracy |
±3° |
Features
◆ A-One Oil Multi-Finger Caliper (24 finger) MFC43C uses a single-cycle ultra-high refresh rate, ensuring that the tool's ability to detect damage is 3-5 times that of the conventional multi-arm currently on the market.
◆ Adopting a high-sensitivity and zero-delay circuit design ensures the instrument's identification of minor defects.
◆ Adopting a 13-core connector, which can be connected with a variety of tools, such as Electro-Magnetic Flaw Detector, Electromagnetic Thickness Measurement, Gamma Well Temperature, Gyro Inclinometer, Downhole TV etc. Multiple sets of logging data can be obtained from a single trip down the well.
Applications
◆ Casing Inspection: Evaluate casing deformation, corrosion, or wear, locate the points of damage, and complete well intervention operations.
FAQ
Q: Are your Multi-Finger Caliper (24 finger) for real-time mode or memory mode?
A: Memory mode.
Q: Do you have case studies of actual data of tool in operations?
A: Yes, we have.
Q: How to operate the tools?
A: We will provide the Operating Manual.
In addition, our technical team will arrange professional operators to conduct online training for you . Easy to operate and safe to use.
Q: How to ensure logging accuracy.
A: Before downhole operations, using a calibrator to correct ensuring the well logging accuracy.
Hot Tags: multi-finger caliper (24 finger), China multi-finger caliper (24 finger) manufacturers, suppliers, factory, memory multi arm caliper tool, Multi finger Caliper 24 Finger , Multi finger Caliper 40 Finger , Multi finger Caliper 60 Finger , Multi finger Caliper Tools, Multifinger Imaging Tool
