Description
A-One Oil Free Point Tool (FPT43C) adopts one-way run measurement, it can detect changes in the magnetic permeability of the casing material, quickly and accurately providing the location of the blockage.
When the stuck pipe ceases operation, FPT43C can reduce the high cost of non-productive downtime. It has a unique design concept, brand-new signal-to-noise ratio (SNR) electronic equipment, and a fully high-configured acquisition module and algorithms, it differs from the traditional method of repeated start-stop measurements.
Thereby enabling the FPT43C to be flexibly used for a wide range of assessment applications in different testing environments.
Technical Parameters
|
General Specs |
|
|
Diameter |
43mm (1-11/16in) |
|
Temperature Rating |
-20℃-175℃ (-20°F-347°F) |
|
Pressure Rating |
140Mpa |
|
Length |
1750mm(68.9in) |
|
Weight |
11.7kg |
|
Testing Range |
45-140 |
|
Outer Casing Material |
TC18 |
|
Medium Influence |
Non |
|
Measuring Speed |
700m/h |
Features
◆ The Free Point Tool can perform continuous measurements within the drill pipe (casing), which greatly enhances the efficiency of well logging, and is highly effective compared to traditional point-by-point pipe inspection tools.It can quickly and accurately determine the location of blockages in high-angle or horizontal wells through a single logging process, making it suitable for high-strength alloy pipes and coated pipes.
◆ It adopts a fully redundant structure with mutual isolation, ensuring safe and reliable completion of each testing task.
◆ It can be delivered to the horizontal section for blockage testing via cable pumping, continuous tubing, and sucker rod.
◆ It can reliably operate through difficult pipe runs to complete testing, without the need to deploy anchors as required by traditional pipe inspection tools.
Applications
The Free Point Tool can be used in conjunction with a variety of cutting tools
◆ Pyrotechnic cutting
◆ Chemical cutting
◆ Mechanical cutting
◆ Hydraulic cutting
FAQ
Q: Are your logging tools for real-time mode or memory mode?
A: Memory mode.
Q: Do you have case studies of actual data of tool in operations?
A: Yes, we have.
Q: How to operate the tools?
A: We will provide the Operating Manual.
In addition, our technical team will arrange professional operators to conduct online training for you . Easy to operate and safe to use.
Q: Can this tool test 5.5" casing?
A: Yes, it can.
Q: Can this tool test oil pipes?
A: Yes, it can.
The traditional Free Point Tool (FPT) require added torque, but the thickness of the oil pipe wall is thin, the method of adding torque cannot be used.
Q: Can this tool test the horizontal wells?
A: Yes, it can.
We adopt the method of electromagnetic continuous logging, it meets the requirements of vertical wells and horizontal wells.
Q: Can the Free Point Tool (FPT) be used to transfer the tools through coiled tubing or sucker rod?
A: Yes, our tool's small diameter allows various transmission methods. If using sucker rods for transmission, the vertical to horizontal section ratio is 3:1.
Q: Does this tool have a dual-system instrument.
A: Yes, Our this tool has two sets of independent circuit systems and power supply systems. Ensure the safe and reliable completion of logging projects.
Hot Tags: free point tool, China free point tool manufacturers, suppliers, factory, Free Point Indicator Tool, Free Point Tool, magnetic stuck point logging tool, stuck pipe handling series
